T30 IMU GNSS RECEIVER
With built-in IMU engine, full-constellation tracking capability, 4G/WiFi/Bluetooth® connection and easy survey workflow with Android-based Survey Master Software, the T30 IMU GNSS receiver is an ideal choice for your survey task.
- 1198
- Channel
- <50 s
- Cold Start
- <30 s
- Warm start
Original ComNav unit·Authorized distributor
About the T30
- 01
GPS L1/L2/L5, BeiDou B1/B2/B3, GLONASS L1/L2, Galileo E1/E5a/E5b/AltBOC, SBAS, QZSS, IRNSS
- 02
BeiDou Global Signal B1C, B2a
- 03
WIFI/UHF/4G Module
- 04
Built-in IMU supports tilt compensation up to 120°
- 05
Two 3400 mAh hot swap Batteries
- 06
Low Power Consumption
- 07
Support PPP and L-Band
- 08
Easy workflow
Multi-constellation tracking
The T30 IMU receiver tracks 1198 channels for all current and future satellites signals, including GPS, GLONASS, Beidou, Beidou global, Galileo, SBAS and L-Band
IMU
With built-in and calibration-free IMU, T30 IMU receiver supports up to 120° tilt survey within the accuracy of 2.5cm, providing more convenient and reliable survey work
Intuitive workflow
The T30 IMU receiver provides intuitive and easy survey workflow via Survey Master Wizard function, improving efficiency for both beginners and professional surveyors
Technical data
Values from the ComNav datasheet. Ask us for the full sheet or a side by side with another model.
Download datasheet (PDF)Performance
- Channel
- 1198
- Satellites tracking
- GPS: L1C/A, L1C, L2P, L2C, L5 BDS: B1l, B2l, B3l, B1C, B2a, B2b GLONASS: G1, G2, G3 Galileo: E1, E5a, E5b, E6c, E5 AItBOC QZSS: L1C/A, L2C, L5, L1C IRNSS: L5 SBAS: L1C/A
- Signal Re-acquisition
- <1.5 s
- Cold Start
- <50 s
- Warm start
- <30 s
- Hot start
- <15 s
- RTK Initialization Time
- <10s
- Initialization reliability
- >99.9%
- Static and Fast Static
- Horizontal 2.5 mm + 0.5 ppm RMS Vertical 5 mm + 0.5 ppm RMS
- Real Time Kinematic
- Horizontal 8mm + 1ppm RMS Vertical 15mm + 1ppm RMS
- Long Observation Static
- 3 mm + 0.1 ppm Horizontal 3.5 mm + 0.4 ppm Vertical
- DGPS
- <0.4m RMS
- SBAS
- 1 m 3D RMS
- Standalone
- 1.5m 3D RMS
- PPP
- 10cm Horizontal and 20cm Vertical
Physical
- Size (W × H)
- Φ 15.5 cm × 7.3 cm
- Weight
- 1.2 kg with two batteries
- Working Temperature
- -40 °C to + 65 °C (-40 °F to 149 °F)
- Storage Temperature
- -40 °C to + 85 °C (-40 °F to 185 °F)
- Humidity
- 100% non-condensing
- Waterproof & Dustproof
- IP67, protected from temporary immersion to depth of 1 m
- Shock
- Survive a 2m drop onto the concrete
- Input Voltage
- 7-28 VDC
- Power Consumption
- 1.92 W
- Li-ion battery capacity
- 2 × 3400 mAh, up to 24 hours typically
- Memory
- 8 GB
Communications
- Serial port (7 pin Lemo)
- 1 Baud rates up to 921,600 bps
- UHF modem
- Tx/Rx with full frequency range from 410-470 MHz - Transmit power: 0.5W, 1W, 2W adjustable - Air Baud Rate: 9600/ 19200/ 11000 adjustable - Range: 3-15 km - Protocol type: Transparent/TT450S/South/Mac/SNLonglink
- WIFI
- 802.11b/g/n, 2.4Ghz
- 4G modem
- - LTE-FDD: B1/B2/B3/B4/B5/B7/B8/B12/B13/B18/B19/B20/B25/B26/B28 - LTE-TDD: B38/B39/B40/B41 - WCDMA: B1/B2/B4/B5/B6/B8/B19 - GSM: B2/B3/B5/B8
- Position data output rates
- 1 Hz, 2 Hz, 5 Hz, 10 Hz, 20 Hz
- LEDs (indicating Power, Satellite Tracking, GPRS Status and Differential Data)
- 5
- Bluetooth
- V 4.0 protocol, compatible with Windows OS and Android OS
- Built-in IMU
- supports up to 120° tilt compensation
- Correction data I/O
- RTCM SC104 Version 2.x, 3.x formats, CMR(GPS only), CMR+(GPS only)
- Position data output
- - ASCII: NMEA-0183 GSV, RMC, HDT, VHD, GGA, GSA, ZDA, VTG, GST; PTNL, PJK; PTNL, AVR; PTNL, GGK - ComNav Binary update to 20 Hz
Datasheets and manuals
Free PDFs for the T30. Need a manual in another language? Ask us and we will send it.
- SinoGNSS T30 IMU GNSS Receiver_EN.pdfEN · PDF · 7.3 MB EN Download
Similar GNSS RTK receivers
Get a quote for T30
Tell us how many units and where they ship. An engineer replies with price, lead time and freight within 24 hours.
- Reply within 24 hours
- Original units with serial numbers
- Local coordinate system preset
Reply within 24 h · Original units · Local datum preset


